GEA RM1
47
Description of the Gea RM1-PC program
Creating a table
The word “table” will be used to identify the contents of the files created and processed
by the Gea RM1-PC program, and are called, when they are on the Gea RM1 system,
sessions or templates.
The function of creating a new table allows the creation of tables that can be executed
manually or automatically on the system; to fill in the table, standard algorithms are used
to calculate the sequence of geometric positions of the electrodes as a consequence of the
measurement method chosen by the operator. The operator can manually change the
positions of the electrodes to adapt them to his needs.
In addition, you can store the table built as a normal GPD file (equivalent to a session on
the system) or as a write-only GPD file (equivalent to a template on the system).
By pressing the New Table button a window will open that will show some options for
the operator in order to guide him in the automatic construction of the table. Figure 26
shows an example of page configuration.
F
IGURE
38
-
CREATION PAGE NEW MANUAL TABLE WENNER GAMMA
Summary of Contents for GEA RM1 1.0
