32
Display window of the session information (see section
Displaying session information
of the last session on which you worked.
Session management
Through this command you access an additional menu that allows you to choose between
some commands to be applied to a session and, to choose a session from the list on the
systems memory to which apply this function.
The possible commands are as follows.
-> New session: creates a new empty generic session, the position of the electrodes can
be defined by the operator, through which the measurements can be stored.
-> Cancel session: it removes a session from the memory of the instrument, freeing up
space for the storage of further sessions.
-> Copy session: creates a session identical to the original session, keeping the results of
the measurements already made. You are asked to enter the name you want to give to the
copy.
-> Copy and clean session: creates a session identical to the original session, erasing all
the measurements already made and maintaining the geometric information of the
electrodes. You are asked to enter the name you want to give to the copy. It basically
allows you to use the original session as a template, and to generate a second session that
has the same measurements and positions of the configured electrodes of the first one.
> Rename session: change the name of a session leaving the other information unchanged.
F
IGURE
25
-
SESSIONS MANAGEMENT
Summary of Contents for GEA RM1 1.0
