33
4.6.1 Mounting the Base
The below steps only apply if you are installing the barrier on a hard concrete
surface. If installing the barrier on different surfaces, please advise the
manufacturer of the best practices and tools for installation.
STEP 1.
Position the barrier in accordance with the above instructions.
STEP 2.
Mark the four mounting holes.
STEP 3
. Drill the holes for the anchor screws. Clear the holes of any dust.
Tip:
You can skip marking the holes and use the Barrier base as the template. Make
sure that the Barrier base doesn't move while you drill, so you don't damage it.
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
