11
Chemical solvents should never be used on the product since they might trigger an
explosion.
For appropriate installation and connection to the electrical network, strictly adhere to
the instructions.
The installer must provide a device (e.g., a magnetothermic switch) that ensures the
equipment's omnipolar separation from the power supply. The requirements specify a
contact separation of at least 3 mm on each pole (EN 60335-1).
The warranty excludes consumable device components,
color fading, and chipping,
increased noise as a consequence of device age, and other cosmetic impacts that do
not impair the product's operation or safety.
2.2. Installation Warnings
Because installation includes mechanical and electrical abilities, it should only be
performed by competent professionals who can give the Compliance Certificate for the
whole installation.
During installation, maintenance, cleaning, and repairs, the device and external
power source must be separated from the power supply.
The upstream electric system must adhere to current laws and regulations.
Install the product only in non-explosive surroundings and atmospheres; the
presence of flammable gases or vapors poses a major safety risk.
The barrier must be exclusively installed on a hard, flat concrete floor.
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
