Parker Hannifin Corporation
Gear Pump Division
Kings Mountain, North Carolina USA
5
Tool List
• Arbor press
• Awl
• Clean, lintless cloths
• Deburring tool (an old file with
cutting teeth ground off)
• Machinist’s hammer
• Soft hammer
• Medium grit Carborundurn stone
• Seal removal tool (See B)
Special Mylar Sleeve
The special mylar sleeve is used
to insert the drive shaft through
the lip seal without damage. The
drawing and chart give details for
making this special tool.
NOTE: Please see tool list for
lip seal bar installation.
PGP/PGM
505
PGP/PGM
511
Seal Removal Tool
Easily made from
an old screw driver.
Heat the tip and
bend as shown.
Grind the tip to fit
the notch behind
the shaft seal.
B
Catalog HY09-SM500/US
Tool List
PGP/PGM500 Series
Service Manual
A
B
C
2.71 - 3.190
0.631 - 0.634
0.634 - 0.635
2.940 - 3.000
0.690 - 0.694
0.698 - 0.702
• Oil and grease
• Snap ring pliers
• Prick punch
• Scale ( 1/32” or 1/64” graduations)
• Small screw driver
• Torque wrench
• Vise with 6” minimum opening.
•
Bar for lip seal installation
• Special mylar sleeve (see sketch)
"C"
"B"
"A" LENGTH
O.D.
I.D.
