Parker Hannifin Corporation
Gear Pump Division
Kings Mountain, North Carolina USA
8
7) Carefully remove the
drive and driven gears.
Avoid tapping the gear
teeth together or against
other hardened surfaces.
Examine and replace if
necessary. (See page 12).
8) Carefully remove the
bushing blocks from the
bottom of body. Examine
and replace if necessary.
(See page
12)
9) Remove the snap ring
(located in front of the
shaft seal).
10) Pry out the shaft
seal. Be careful not
to damage seal bore
in flange.
11) Inspect all
bushings for scoring
or discoloration and
replace if necessary.
Catalog HY09-SM500/US
Disassembly Information
PGP/PGM500 Series
Service Manual
