The Graphical Keypad
7-5
AC30
series Variable Speed Inverter
SOFT KEY ACTION INDICATION
The use of Soft Key 1 and Soft Key 2 is indicated on the bottom line of the display by the icon
shown above the key.
Soft Key 1
Return:
Abort
Set-up
When navigating around the menu tree, the return function navigates to the previous level. In
this case the return is the opposite of the OK key.
When changing a parameter value the Abort key discards any modifications and leaves the
parameter unchanged.
The Set-up icon is shown on the Welcome page of the GKP. Pressing this starts the set-up
wizard, (Chapter 9)
Soft Key 2
Description
Notes
Icon
Reset GKP entered password, (lock parameters)
1
Save parameters
1
Toggle between Local and Remote modes
2
Change direction, (Local Sequencing only)
2
Toggle parameter “Soft Key 2 Value”, present value 0
2
Toggle parameter “Soft Key 2 Value”, present value 1
2
Add parameter to favorites menu
3
Remove parameter from favorites menu
3
1. Feature available in the “Welcome” screen.
2. Feature available while navigating menus or parameters, (not while editing parameters).
3. Feature available while viewing parameter attributes
Soft Key 1
Soft Key 2
Summary of Contents for LINKnet AC30P
