Parker LINKnet AC30P, Hardware Installation Manual

Page: 29 / 176

Installation - Power Stack
4-7
AC30 series Variable Speed Inverter
Feed the three phase motor cables through the bottom gland plate and connect onto terminals U, V & W. Phase rotation is important to ensure
consistency between the inverter control direction and motor shaft rotation.
When wiring an inverter for use as an AFE, terminals U, V & W are used to connect to the post filter three phase mains supply.
Earth both the inverter and motor earth (or incoming supply for an AFE application) to the inverter PE terminals.
740 Stack Bottom Terminals – Frames K – N
Refer to page 4-9 for terminal block wire ranges and page 4-11 for correct terminal torque guidelines.
Refer to ‘Chapter 6 – Associated Equipment’ for recommended system components for use with the inverter.