Paramount User Guide
75
|
P a g e
Model Mechanical Switches
The balance, star and lock symbols shown are etched into the top of the cover of the
Paramount MX, where they are most visible when setting up the mount (Figure 36).
The Balance, Star, and Lock positions (Figure 37) are etched on the front of the Paramount
MX+ worm block covers. The arrow-shaped Two Position Switch is used to balance and
track; the circular Transport Lock Knob is used to lock the axis during transport, or free the
axis during normal use.
Notes:
The Transport Lock Knob is slightly recessed in the lock position.
The Transport Lock Knob should always be rotated clockwise when locking or
unlocking the axis.
When the Two Position Switch (Figure 38) is in the Balance position, the worm and gear are
separated, so the axis can rotate freely. When the switch is rotated to point at the star
(Track position),
and
the Transport Lock Knob is in the unlock position, the mount is ready
for normal operation.
Notes:
The Transport Lock Knob is slightly recessed in the lock position.
The Transport Lock Knob should always be rotated clockwise when locking or
unlocking the axis.
ADJUSTING THE PARAMOUNT’S MECHANICAL SWITCHES ALWAYS REQUIRES
BOTH HANDS!
Rotating the Two or Three Position Switch for both the RA axis and the Dec axis
requires the use of both hands to prevent sudden or unexpected rotation of the
mount.
Before rotating the Dec Axis Two or Three Position Switch with your right
hand, firmly grasp the Versa-Plate with your left hand to prevent sudden
rotation of this axis from an unbalanced payload.
Before rotating the RA Axis Two or Three Position Switch with your right
hand, firmly grasp the Counterweight Shaft with your left hand to
prevent sudden rotation of this axis from an unbalanced payload.
When the switch is rotated to, or passes through the Balance Position, the axis
will rotate freely. Unexpected rotation of either axis due to an unbalanced
payload can cause personal injury or serious damage to the mount!
Always use extreme caution and, please, always use BOTH HANDS!
