Paramount User Guide
130
|
P a g e
Axis Parameters
Description
Paramount MX+
Paramount M
Y
T
Bisque TCS
Debug Output?
Set this value to 1 to show control system diagnostics.
Startup Test Joystick RA
If set to 1, then Bisque TCS will abort startup and emit a single beep if
the joystick is not centered when power is turned on.
Startup Test Joystick Dec
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if the joystick is not centered when power
is turned on.
Startup Test Joystick
Button
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if the joystick button is pressed when
power is turned on.
Startup Test Guider
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if any of the guider lines are high when
power is turned on.
Play Guider Sound
If set to 1, the Bisque TCS speaker will emit a single “click” each time the
guider state changes.
IR Enabled
If set to 1, then the infrared communications port is enabled (MKS 4000
only).
Hand controller rate 1
Hand controller rate number 1.
Hand controller rate 2
Hand controller rate number 2.
Hand controller rate 3
Hand controller rate number 3.
Hand controller rate 4
Hand controller rate number 4.
General Purpose I/O 1
General purpose output direction 1.
General purpose I/O 2
General purpose input/output toggle.
General Purpose I/O 3
General purpose output direction 2.
General purpose I/O 4
General purpose input/output toggle.
