Paramount Fitness ME II, User Manual

Page: 190 / 195

Paramount User Guide
190 | P a g e
Revision Number Changes

When collecting tracking log data for periodic error correction, added
a description of the location where autoguiding logs are saved.

Added the recommended minimum during to collect tracking log data
for the Paramount M
Y
T.

Removed textual description for the Rough Polar Alignment
Procedure which has been replaced by the Rough Polar Alignment
command in
TheSkyX Pro .

Clarified the Versa-Plate wide mounting orientation for the
Paramount M
Y
T.
1.83

Added an explanation about the Paramount ME II declination axis
spacers.

Updated the Paramount firmware installation process based on
TheSkyX Pro Version 10.3.0 Build 8495 and later.
1.82

Updated photo related to the generic cable set.

Added note to cable set wiring diagrams that wire cable may vary
compared to the cable you receive.
1.81

Corrected the generic cable set documentation (these cables are no
longer shielded).
1.79

Clarified the 12V and 5V Instrument Panel port documentation.
1.78

Corrected the number of Paramount MYT counterweights in the
Packing List.
1.77

Added Paramount M
Y
T documentation.
1.76

Corrected maximum altitude for Paramount ME II polar axis.

Attempted to clarify the altitude tics for the Paramount ME II,
Paramount MX/MX+ Altitude Scales.
1.75

Minor technical corrections.
1.74

Corrected joystick graphic documentation.

Updated publish date.
1.73

Corrections and changes related to the Paramount MX+
documentation.

Attempted to clarify how to properly power the Paramount ME II.

Updated software slew limit documentation.

Updated Bisque TCS documentation and reference WiSky Wi-Fi
board.