PARAMOUNT BED Qualitas Nx Series Instruction Manual Download

Page: 64 / 104

Ⅲ．

SUITABLE PRODUCTS

IV pole

* IV pole (IC-56A, IC-56B, IC-56C) is not designed for sales in Europe. Also, it is not distributed in some

regions as well where it is not registered as medical equipment. For details on the sales of IV pole,

contact Paramount Bed (see p.100) or your distributor.

You can hook a drip bag by attaching an IV pole.

Accessory attachment holes are located at the head end and foot end of the bed in a total of 4 locations.

Model No.

IC-56A, IC-56B, IC-56C,

KC-56A, KC-56B, EC-562

* IC-56B, IC-56C and KC-56B have two hooks.

* IC-56A, KC-56A and EC-562 have four hooks.

Note that the Accessory attachment hole at the foot end moves together when the

extension frame is pulled out.

Summary of Contents for Qualitas Nx Series









































































































Search results

Summary of Contents for Qualitas Nx Series

Reviews:

Related manuals for Qualitas Nx Series

Brands by name

Popular brands

PARAMOUNT BED Qualitas Nx Series, Instruction Manual

Search results

Summary of Contents for Qualitas Nx Series

Reviews:

Related manuals for Qualitas Nx Series

Brands by name

Popular brands