PARAMOUNT BED Qualitas Nx Series, Instruction Manual

Page: 62 / 104

Ⅲ．
SUITABLE PRODUCTS
61
Nurse control panel (IA-54580*** only)
You can adjust the angle of the head and knee sections, bed angle, bed height, and bed inclination angle
with the nurse control panel. The nurse control panel is intended to be operated only by medical
professionals.
Model No.
IC-A1340 (IA-54580*** only)
<Part names and functions>
Operation buttons
To raise the part to operate, press the button, and to lower it, press the button. (Only (1) – (3))
(1) Head up/down buttons ..................................…….. Adjust the angle of the head section.
(2) Knee up/down buttons....................................……. Adjust the angle of the knee section.
(3) Height up/down buttons..................................……. Adjust the bed height.
(4) Cardiac Chair motion buttons..........................…… Adjust the angle of the head/knee sections
and bed.
(5)
Trendelenburg/reverse Trendelenburg (TR/RTR) button…..
Adjust the inclination angle of the bed.

Press the operation button to operate the bed and release the button to stop the
operation at its position.

Press two or more operation buttons simultaneously to stop the operation.

If you stopped the operation by pressing two or more buttons simultaneously,
release your finger from all buttons to perform the operation again.

If you are using the Cardiac Chair motion button, pause after the head and knee
sections are raised. Press the button again to incline the bed.
Status indication
(6) Battery status indicator LED .................. Indicates the power supply status for the bed (See p.38).
On (green) : Remaining battery power is sufficient.
Off : The power plug is disconnected and the battery power is fully used up.
Flashing (green) : Indicates the battery status. See p.38.
(7) Low height indicator LED ………………. Minimum height: LED indicator turns off, otherwise: LED
indicator turns on.