PARAMOUNT BED cococia Fuka Instruction Manual Download Page 27

The pump for Cococia F

ū

ka is intended for use in the electromagnetic environments (for home and professional healthcare) 

specified below.
The customer or the user of the pump for Cococia F

ū

ka must use it in such an environment.

The pump for Cococia F

ū

ka uses RF energy only for its internal 

functions. Therefore, its RF emission level is low and cause 
almost no interference with nearby electronic equipment. 

The pump for Cococia F

ū

ka can be used in all of the following 

facilities. Domestic facilities or facilities directly connected to a 
low-voltage power supply network for general households.

Cococia F

ū

ka special safety precautions related to EMC. 

Install and operate the air mattress according to the following information.
Cococia F

ū

ka requires special safety precautions regarding EMC to be observed. 

Install, operate, and use the air mattress according to the information provided below. 
Cococia F

ū

ka is intended for use in an electromagnetic environment specified according to 

“Electromagnetic interference”.
Using Cococia F

ū

ka in an unintended environment may result in the occurrence of the following 

problems. 

The function for supporting the 

user

’s body weight may not be maintained.

If accessories, transducers, or cables other than those specified and sold
by the manufacturers of Cococia Fuka are used as replacement parts for
internal components, it may result in an increase in emission or a decline 
in immunity of Cococia Fuka. 
Use portable RF communication devices (including antenna cables and
peripheral devices such as external antennas) at a distance of at least 30
cm from all parts of Cococia Fuka. Using the RF communication devices
within a distance of 30 cm may cause a decline in the performance of 
Cococia Fuka.
Cococia Fuka cannot be used adjacent to another device or in astacked 
state.If Cococia Fuka must be used adjacent to another deviceor in a 
stacked state, make sure Cococia Fuka operates appropriately at the 
location of use.

Cococia Fuka is intended for use in doctor’s offices, clinics, exclusive medical facilities, 
independent surgery centers, multiple treatment facilities, hospitals (except near high-frequency 
surgical equipment, and outside RF shielded rooms for magnetic resonance images). The 
customers or users of Cococia Fuka must ensure that Cococia Fuka is always used in this 
environment.

Due to its emission characteristics, Cococia Fuka is suitable for use in hospitals. If used in a home 
environment, this device may not offer sufficient protection against radio frequency communication 
services.It may be necessary for the user to take relaxation measures such as 
re-arranging or changing the direction of the device. 

Summary of Contents for cococia Fuka





































Reviews: