MAINTENANCE AND INSPECTION
17
1. Maintenance
WARNING
z
Always unplug the power plug before performing maintenance. Failure to
do so may cause the air mattress to malfunction, possibly causing injury.
CAUTION
z
If the pump is removed from the air mattress for maintenance, be careful
that water or other liquid does not enter the coupling and blowing tube
insertion port. Attach the cap to the coupling. Entry of moisture into the
pump and air cells may cause a failure and mold generation.
z
After maintenance, check that the fasteners are closed properly. If the
cover is removed for maintenance, close the two fasteners for the cover
properly after maintenance. Entry of moisture from an open fastener may
cause the padding (air cells, blowing tube, etc.) to deteriorate and mold
generation.
z
The air mattress cannot be cleaned with a mattress cleaning machine,
ozone sterilizer, autoclave, or washing machine. The air mattress or
cleaning/sterilizing equipment could be altered, damaged, or deteriorate.
Maintenance of the air mattress
[How to clean the cover]
J
When the cover of the air mattress is stained or the user will change, always clean the entire cover
surface of the air mattress using the following steps (
to
).
z
Periodically clean and disinfect the air mattress.
If there are any contaminants (blood, feces, etc.), remove them.
Use soapy water (commercially available soap, such as neutral detergent diluted with water) to wipe the
surface of the cover on the air mattress to remove stains.
CAUTION
z
Do not clean while the fastener is open. Doing so may cause the padding
(air cells, blowing tube, etc.) to deteriorate and mold generation. When the
fasteners are open, close it.
z
If blood, urine, sebum, and other stains are present, use neutral detergent
or soap to clean them and do not leave them. If such stains are left as is,
the cover could deteriorate or develop an odor or permanent stain.
Odors adhering to the cover during use can be reduced using
commercial mouthwash.
For stain removal, use oxydol (hydrogen peroxide water: 3%
concentration).
z
Do not use a volatile cleaning solution (such as paint thinner, benzene, or
gasoline). Discoloration or deterioration could result.
Use disinfectant to clean and disinfect the surface of the air mattress.
For disinfectant, use the following chemicals and observe the specified concentration. Also, use those
disinfectants according to the handling method of each disinfectant.
0.02%
0.05% - 0.2%
0.05% - 0.2%
0.05%
sodium hypochlorite
benzalkonium chloride
benzethonium chloride
chlorhexidine gluconate
CAUTION
z
For disinfectant, do not use chemicals other than those listed above.
Doing so could cause deterioration in the waterproof performance of the
cover or discoloration.
Naturally dry the air mattress on the bed, etc. Do not dry the cover in the sun.
Summary of Contents for cococia Fuka
Page 34: ...MEMO 33...
Page 35: ...MEMO 34...
Page 36: ...Original Instruction Manual Made by TorindoCo Ltd 2020 11 AL300429 V1 01...
