PARAMOUNT BED cococia Fuka, Instruction Manual

Page: 17 / 36

16
Bend in a Z-shape
Cap
2. How to lay the sheet
J
When the air mattress has expanded, lay a sheet and mattress pad.
Do not cover the CPR valve with a sheet, but store it between the headboard and the air mattress.
WARNING
z Do not cover the CPR valve with a sheet. The CPR function may not be able
to be used quickly in case of emergency. (For the CPR function, see below.)
z When a heavily perspiring person uses the air
mattress, provide sufficient ventilation and change
posture as needed. Furthermore, replace and clean
the sheets and mattress pads and perform daily
maintenance of the air mattress frequently.
3. How to use the CPR function
J
Air can be discharged from the air mattress quickly by using the CPR function in case of emergency
and cardiac massage can be started in 30 seconds.
* Air discharge time varies depending on the weight of the user and the setting of each function.
J
Hold the CPR valve at the head end of the air
mattress (see the figure in 2. How to lay the sheet)
and turn the plug from "CLOSE" to the "OPEN"
position.
z
When supplying air to the air mattress again after using the CPR function, turn the plug from
"OPEN" to the "CLOSE" position.
4. Action in the event of power failure
J
When a power failure occurs, use the following procedure to remove the air mattress from the pump
and attach the cap to the coupling to prevent air leakage.
Bend the blowing tube tightly in a
Z-shape to prevent air from being
leaked from the air mattress and hold it
firmly with a hand.
Remove the coupling from the pump.
Attach the cap to the coupling.
z Air can be held for one month, but this period varies depending on the conditions of use.
However, the depressurization effect and functions such as the alternate pressure for the air
mattress do not work during power failure, so be careful about the user's condition.
z
The settings before the power failure are maintained after power restoration.
No
te!
No
te!
CPR valve
Sheet
Plug