INSTALLATION
13
3. Installing pump
J
Attach the board hook of the pump to the footboard of the bed and secure it.
z
If the pump is used with a bed where the hook cannot be
attached to the footboard, install the pump in a horizontal
stable location at the foot end where it won't get in the way.
* Install the pump where the blowing tube will not be pulled
when the height of the bed is raised.
z
If condensation is on the pump, wipe off the pump with a
dry cloth and warm the pump up to the room temperature
before use.
WARNING
z
When handling the pump, do not hold the power cable, but hold the handle of
the pump firmly. There is a risk of electric shock and fire due to disconnection.
z
Take care when handling the pump. The air mattress may malfunction,
causing injury or failure. In addition, there is a risk of electric shock or fire
due to a short circuit.
Do not step on, press, or apply excessive force to the pump.
Do not drop the pump on the floor or hit it against the wall.
Do not forcefully pull the power cable.
Do not damage the pump.
Do not spill water on the pump or touch it with wet hands.
z
When installing the pump, do not bend the
blowing tube. Sufficient air may not be
supplied, possibly causing bedsores.
z
Take care when handling the blowing tube.
There is a risk of injury due to falling or
damage to the product.
Be careful not to trip over the blowing tube.
Do not step on or place an object on the
blowing tube.
CAUTION
z
When installing the pump on the floor instead of hooking it to the
footboard of a bed with a height adjustment function, be careful not to
allow the pump to get caught between the frame of the bed and the floor.
When the height of the bed is lowered, the pump may get caught between
the frame and the floor, possibly causing damage to the pump.
z
When placing the pump on the floor, lay a cloth or paper on the floor to
prevent the leg rubber from directly contacting the floor material. When the
leg rubber directly contacts the floor material, the floor material may discolor.
z
Do not allow the pump to come into direct contact anywhere other than the footboard of the
bed. Vibration noise may be generated. Furthermore, avoid installing the pump at the head
end. A slight operating noise may be audible.
No
te!
Leg rubber
No
te!
Summary of Contents for cococia Fuka
Page 34: ...MEMO 33...
Page 35: ...MEMO 34...
Page 36: ...Original Instruction Manual Made by TorindoCo Ltd 2020 11 AL300429 V1 01...
