PARAMOUNT BED 7B01001000A3 Operator'S Manual Download

Page: 43 / 120

Head end

Power ON button (hold down for 4 seconds) : Enables battery-powered operation. When using the bed for

the first time or using it after storage, press the power ON
button. When the power turns on, the power lamp flashes.

Power OFF button (hold down for 1 second) : Disables battery-powered operation. When storing the bed,

press the power OFF button to turn off the power.

Note

By default, the power is off. Inserting the power plug into the outlet automatically turns the

power supply on.

When the power is turned on, the power remains on even if the power plug is inserted into

or disconnected from the outlet. To stop battery-powered operation, press the power OFF
button.

If the battery has been over-discharged, the power supply automatically turns off.

The battery is located under the main frame at the
head end of the bed.

Note

When replacing the battery, remove the
cover. When attaching the cover, pay at-
tention to its orientation.

* The illustration shows the bed with the head

section raised and the headboard and cover
removed.

Battery (excluding PA-H 611*, PA-H 612*, PA-H 613*, PA-H 614*)

* For the PA-H 611*, PA-H 612*, PA-H 613*, PA-H 614*, a battery is available as a suitable product.

<Part names>

When attaching the cover,
the cut-out section should
be at the head end.

Cover

Power OFF button

Power lamp

Power ON button

* Located at the bottom

(back side).

Battery

Summary of Contents for 7B01001000A3

























































































































Search results

Summary of Contents for 7B01001000A3

Reviews:

Related manuals for 7B01001000A3

Brands by name

Popular brands

PARAMOUNT BED 7B01001000A3, Operator'S Manual

Search results

Summary of Contents for 7B01001000A3

Reviews:

Related manuals for 7B01001000A3

Brands by name

Popular brands