PARAMOUNT BED 7B01001000A3 Operator'S Manual Download | Manualshive

Page: 15 / 120

background image

Foot end

Foot end

Head end

Head end

14

WARNING

<Operating the bed>

g

Do not allow the bed to be operated by a person deemed incapable of un-

derstanding bed operation (a child aged 12 or under or a person with de-
mentia).

n

If a person deemed incapable of understanding the operation operates the side-rail integrated panel,
patient control panel, handheld controller (standard or accessory), or BED Navi (accessory) by
oneself, the body may get caught in the bed by mistake, resulting in unexpected injury.

If there is a possibility that such a person operates the side-rail integrated panel, patient control panel,

handheld controller (standard or accessory), or BED Navi (accessory), use one of the following
procedures to limit operation to prevent accidents caused by unintended operation.
• Set Overall lock-out on the side-rail integrated panel or BED Navi (accessory) to disable the

operation of the side-rail integrated panel, patient control panel, handheld controller (standard or
accessory), and BED Navi (accessory). (For the setting procedure, see p. 65 or the instruction
manual for the BED Navi (accessory).)

• Set Patient lock-out on the side-rail integrated panel or BED Navi (accessory) to disable the

operation of the patient control panel and handheld controller. (For the setting procedure, see p.
65 or the instruction manual for the BED Navi (accessory).

• Set Selective lock-out on the BED Navi (accessory) to disable individual head/knee/height/inclining

operations. (For the setting procedure, see the instruction manual for the BED Navi (accessory).)

• Disconnect the power plug and turn the battery off.

n

Note that resetting the settings on the BED Navi (accessory) enables all bed operations again even

when the side-rail integrated panel, patient control panel, handheld controller (accessory), and BED
Navi (accessory) operations have been disabled. The bed may move unexpectedly, resulting in injury.
(See the instruction manual for the BED Navi (accessory).)

g

Use the bed in the correct orientation.

Lying down on the bed with the feet at the head end
and the head at the foot end induces an unnatural
posture during bed operation (mattress deck angle)
which may result in injury.

g

Do not perform any angle adjustment when the patient is lying face down or

on their side (in any posture other than lying face up).

There is a risk of injury caused by extending the
joints backward.

«
...
13
14
15
16
17
...
»

Summary of Contents for 7B01001000A3

























































































































Reviews:

No comments

Related manuals for 7B01001000A3

Brand: Landoll Pages: 34

Brand: Panasonic Pages: 30

Brand: DAKO Pages: 25

Brand: 3M ESPE Pages: 50

Brand: VACGEN Pages: 13

Brand: Fayat Group Pages: 50

Brand: Halyard Pages: 88

Brand: Mackie Pages: 18

Brand: Mackie Pages: 2

Brand: Mackie Pages: 8

Brand: Mackie Pages: 7

Brand: Nederman Pages: 255

Brand: Yamaha Pages: 178

Brand: Yamaha Pages: 15

Brand: Bartscher Pages: 20

Brand: Bartscher Pages: 24

Brand: H&S Pages: 32

Brand: Kaiweets Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands