PARAMOUNT BED 7B01001000A3 Operator'S Manual Download

Page: 55 / 120

WARNING

Notification is not made during bed operation (e.g., head up, height ad

justment) even if the patient gets out of the bed or sits up on the bed. Fur-
thermore, getting into or out of the bed during bed operation may cause

the patient to fall off or fall over, resulting in injury. If you consider that the

patient may get in or out of the bed during bed operation, set Overall lock-
out or Patient lock-out (see p. 65).

Before using BED EXIT ALARM, set the notification function properly (for

the setting procedure, see the instruction manual for the relay unit). If the

settings are not correct, detection may not work and notification may not be

made, and the patient may fall off or fall over, resulting in injury. Even when

the settings are correct, detection may not work and notification may not be

made in the following cases.

If it takes 4 minutes or more for the patient to get out of the bed or sit up on the bed

If the patient gets out of the bed or sits up on the bed after a heavy object (which weighs more than

half the patient’s weight) is placed on the bed

If the patient who is lying at the foot end of the bed sits up (SIT-UP function)

If the patient sits up while placing his or her hand or elbow on the top of the head end of the bed (SIT-

UP function)

When using BED EXIT ALARM, use it at a temperature between 15˚C and

30˚C and humidity between 30% RH and 75% RH. The detection accuracy

may decrease, notification may not be made, and the patient may fall off

or fall over, resulting in injury.

Do not place objects such as furniture and fixtures between the bed and

floor. Detection may not work and the patient may fall off or fall over, re

sulting in injury.

Summary of Contents for 7B01001000A3

























































































































Search results

Summary of Contents for 7B01001000A3

Reviews:

Related manuals for 7B01001000A3

Brands by name

Popular brands

PARAMOUNT BED 7B01001000A3, Operator'S Manual

Search results

Summary of Contents for 7B01001000A3

Reviews:

Related manuals for 7B01001000A3

Brands by name

Popular brands