PARAMOUNT BED 7B01001000A3, Operator'S Manual

Page: 27 / 120

26
3. Product symbol definitions
The following symbols are used for this product.
Bed
Symbol Description
Country of manufacture (Made In
Indonesia)
Manufacturing site
* In the country of origin, the site
acts as the manufacturer.
Date of manufacture (YYYY-MM-DD)
Manufacturer
* It may be called “Legal Manufac-
turer” or “Brand Owner” etc.
* This symbol is not applicable in
the country of origin.
CE mark
Authorised representaive in the
european community
Serial number
Lot number
Medical device
(This product is a medical device or
an accessory for medical device in
Europe, and may be such a device in
some countries and regions depend-
ing on their regulations. An accessory
for medical device is required to be
labeled as “Medical Device” under
medical device regulations in Europe.)
Model number
Indicates products covered by the
EU directive on waste electrical and
electronic equipment (WEEE).
Indoor use
Refer to the instruction manual
Refer to the instruction manual
KOHKIN SIAA mark
This is a 2D Code (GS1 DataMatrix)
that encodes the UDI (Unique
Device Identifier) required by the
Unique Device Identification System
designed to adequately identify
devices through distribution and use.
Type B applied part
Symbol Description
Protective ground mark
International protection code
Safe working load
Maximum user weight
Product weight
Maximum weight (Product
Safe working load)
The medical bed for adults
CPR lever
Do not operate the bed with part of
the body placed in a gap.
Be careful not to get caught in the
moving parts of the bed.
Do not lean over a side-rail.
Be careful not to get your head and
neck caught in the gap of the
side-rail.
Side-rail stopper locked/unlocked
status
The side-rails should be operated
by the nurse from outside the bed.
Make sure that a mattress or other
products used with the bed are
suitable products designated by
Paramount Bed.
Locking steering (straight forward
movement)
Four casters free
Four casters locked
The lower limit setting position of
the X-ray cassette.
* When the cassette tray stopper is
set at the lowest position