PARAMOUNT BED 7B01001000A3 Operator'S Manual Download | Manualshive

Page: 13 / 120

background image

12

WARNING

g

Do not operate the bed with part of the body placed in a gap.

n

A body part could get caught in a gap, resulting in

injury.

n

Be especially careful to check a patient who might

act in unexpected ways or cannot maintain their
posture independently.

g

Do not insert a hand (fingers) or legs between the bed frame and the mat

-

tress deck during bed operation.

n

A body part could get caught in the gap between the lowered mattress deck and the bed frame or

board, resulting in injury.

n

Be especially careful to check a patient who might act in unexpected ways or cannot maintain their

posture independently.

g

Be careful to prevent any part of the body from entering the gap between

the bed and a wall or other objects.

n

There is a risk that a part of the body may get caught, resulting in injury.

n

Be especially careful to check a patient who might act in unexpected ways or cannot maintain their

posture independently.

g

Do not crawl under the bed or place your head, hands, or legs under the

bed.

n

A body part could get caught in the gap between

the moving parts of the bed and the frame or side-
rail, resulting in injury. Check to make sure there
are no objects around the bed before operating
the bed.

n

Be especially careful to check a patient who might

act in unexpected ways or cannot maintain their
posture independently.

g

Check the patient’s condition when adjusting the mattress deck angle or

bed height.

If the patient moves while the mattress deck angle or bed height is adjusted, the patient may fall off the
bed or get caught in a gap, resulting in injury. In particular, if the patient cannot maintain their posture
independently, support their body when performing an adjustment.

g

When attaching a suitable product, make sure there are no foreign objects

in the Accessory attachment holes.

If there are foreign objects, the accessory cannot be attached correctly and there is a risk of the patient
falling off the bed, or unexpected gaps being created and part of the body getting caught, resulting in
injury.

«
...
11
12
13
14
15
...
»

Summary of Contents for 7B01001000A3

























































































































Reviews:

No comments

Related manuals for 7B01001000A3

Brand: THORLABS Pages: 44

Crouse-hinds series

Brand: Eaton Pages: 32

Brand: jcb Pages: 41

Brand: Raytec Pages: 60

Brand: Tascam Pages: 3

Brand: SAC Pages: 2

Brand: IBC Pages: 4

Brand: American DJ Pages: 12

Brand: aion Pages: 10

Brand: COOPS & FEATHERS Pages: 4

Brand: Easy Camp Pages: 36

Brand: Erbe Pages: 154

AutoMate 2500 series

Brand: Beckman Coulter Pages: 50

Brand: Grundig Pages: 16

Brand: Conrad Pages: 34

Brand: Yuwell Pages: 18

BIS U-4A7-082-01C-07-S4

Brand: Balluff Pages: 138

Brand: 2connect Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands