Paradyne Hotwire 7974, User Manual

Page: 84 / 165

Testing
6-14
7970-A2-GB20-00 August 1999
G.703 Repeater Loopback
G.703 Repeater Loopback (RLB) loops the signal being sent from the data port
back to the data port and to the network interface.
Activating the G.703 Repeater Loopback test causes the EOC, used for
management, to be lost to the remote unit.
CAP
DSL
Port G.703
Port
CAP E1
LIU
Framer Framer Transceiver
98-15999
"
Procedure
To run a G.703 Repeater Loopback:
1. Position the cursor at the Start command next to G.703 Repeater Loopback
on the Network & G.703 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
A G.703 Repeater Loopback cannot be started when any other loopback test is in
progress.