Paradyne Hotwire 7974, User Manual

Page: 59 / 165

Monitoring the Unit
5-5
7970-A2-GB20-00 August 1999
Self-Test Results Messages
The results of the last power-up or reset self-test appear in the middle column of
the System and Test Status screen.
Table 5-2. Self-Test Results Messages
Message What Message Indicates What To Do
Passed No errors were detected.
CPU Failed The CPU failed internal testing. 1. Reset the unit and
try again
Device Failed One or more of the unit’s integrated circuit
chips failed device-level testing.
try again.
2. Call your service
representative for
DSX-1 Failed
Sync Port Failed
G.703 Failed The unit failed to loop data on the DTE
interface circuit.
re resentative for
assistance.
Memory Failed The unit failed memory verification.
FPGA Failed A failure in the FPGA was detected.
DataPath Failed The unit failed to loop data between the
DSX-1 Port and the DSL loop.
Failure xxxxxxxx An internal failure occurred. (xxxxxxxx
represents an 8-digit hexadecimal failure
code for use by service personnel.)
Record the failure code
and contact your
service representative.