Paradyne Hotwire 7974, User Manual

Page: 22 / 165

Using the Asynchronous Terminal Interface
2-2
7970-A2-GB20-00 August 1999
Initiating an ATI Session
The Main Menu screen is displayed on the screen unless a login ID and
password is required or the ATI is already in use.
If the ATI is already in use, you will see:
H
A
connection refused
or
connection failed
message (if you are
using a Telnet session), or
H
The IP address of the other user (if you are using the Management Serial
port).
If security is enabled on the unit and you used Telnet to access it directly (you did
not log in through the MCC), the system prompts you for a login ID and
password.
Î ÎÎ
Login Hotwire
Model: 79xx
LOGIN
Login ID:
Enter Password:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions Exit