Paradyne FrameSaver 9720, User Manual, Page: 265 / 340

9700-A2-GB20-20 December 2002
C-1
C
Router CLI Commands, Codes, and
Designations
CLI Commands
The FrameSaver DSL Router is managed with text commands from the Command
Line Interface (CLI). The CLI can be accessed:
Locally via a PC or asynchronous terminal connected to the COM port.
Remotely via a Telnet session.
The conventions used in the command line syntax are shown below.
With the exception to the Login ID and Password, the CLI is not case-sensitive.
Refer to Navigating the Router’s CLI in Chapter 2, User and Command Line
Interfaces, and Basic Operation,
for additional information.
Convention Translation
[ ] Brackets indicate an optional element.
{ } Braces indicate a required entry.
| Vertical bars separate mutually exclusive elements. Enter one
element only.
[{ }] Braces within brackets indicate a required choice within an optional
element.
Italics Entry is a variable, which must be supplied by the operator.
Bold
Entry, or the minimum characters that can be entered, must be
typed as shown.
x.x.x.x
32-bit IP address and mask information where
x is an 8-bit
weighted decimal notation.
xx:xx:xx:xx:xx:xx
MAC address information where x is a hexadecimal notation.