Paradyne FrameSaver 9720, User Manual, Page: 11 / 340

9700-A2-GB20-20 December 2002
ix
About This Guide
Purpose and Intended Audience
This document contains information that applies to FrameSaver DSL (Digital
Subscriber Line) 9720, 9783, and 9788 CSU/DSUs (Channel Service Unit/Data
Service Units) and FrameSaver DSL routers running firmware release level 2.0.4
and above. Features slated for firmware release 2.1, such as Telnet capability, are
described in this manual but may not be immediately available in all models.
It is intended for system designers, engineers, administrators, and operators who
are familiar with the operation of digital data communications equipment and frame
relay networks.
NOTE:
In this manual, CSU/DSU refers to the line termination capability of the DSL
endpoint, and does not imply association with traditional T1 or DDS
equipment.
Document Organization
Section Description
Chapter 1, About
FrameSaver DSL Devices
Identifies how FrameSaver DSL devices fit into
Paradyne’s Service Level Management (SLM) solution,
and describes the unit’s basic, unique, and advanced
features.
Chapter 2,
User and
Command Line Interfaces,
and Basic Operation
Shows how to navigate the menu-driven user interface
and the router’s Command Line Interface (CLI).
Chapter 3,
Configuration
Procedures
Shows how to access and save configuration options.
Chapter 4, Configuration
Options
Describes the configuration options available for the
devices.
Chapter 5, Configuring the
FrameSaver DSL Router
Describes the FrameSaver DSL Router’s interfaces and
features, with sample router scenarios, and how to
configure the router.