Paradyne FrameSaver 9720, User Manual, Page: 153 / 340

7. Operation and Maintenance
9700-A2-GB20-20 December 2002
7-17
% The DHCP Server and NAT
cannot both be enabled An attempt was made to enable the DHCP server
and Network Address Translation (NAT), but they
are already enabled.
% The Next Hop IP address is
assigned to an interface or
sub-interface on this device The route entered had a Next Hop IP address that
is in the interface’s assigned address range.
% TCP/UDP port must be 0–65535 The port number entered is outside the specified
range.
% Traceroute hops must be
between 1 and 128 hops A TraceRoute test was attempted, but the maximum
hop value is outside the specified range.
% Traceroute packets must be
between 0 and 1500 bytes A TraceRoute test was attempted, but the packet
length is outside the specified range.
% Traceroute timeout must be
between 1 and 30 seconds A TraceRoute test was attempted, but the timeout
value entered was outside the specified range.
% Unable to delete physical
interface Physical interfaces cannot be deleted; only
sub-interfaces can be deleted.
% Unable to Transmit ping packet A Ping cannot be performed because:
No ports are enabled for IP
The specified interface does not exist
The link is down
% Unable to Transmit traceroute
packets A traceroute cannot be performed.
Table 7-4. CLI Messages (5 of 5)
Message What It Indicates