Paradyne FrameSaver 9720, User Manual, Page: 173 / 340

7. Operation and Maintenance
9700-A2-GB20-20 December 2002
7-37
Frame Relay LMI (CSU/DSUs only)
LMI Protocol The LMI protocol configured for the frame relay link. Normal
condition.
Status Msg Received Number of LMI status messages received over the interface.
Normal condition.
Total LMI Errors Number of LMI errors, including reliability errors, protocol errors,
unknown report types, unknown information elements, and
sequence errors.
Number of Inactives Number of times the LMI has declared the frame relay link
Inactive.
Frame Relay HDLC Errors
Rx Total Errors Total number of errors received on the interface, including:
Receive invalid frames (short frames, long frames, invalid
DLCIs, unknown DLCIs, and unknown errors)
Rx Total Discards
Receive errors (non-octet aligned frames, frames with CRC
errors, and Rx Overruns)
Rx Total Discards Total number of discards received on the interface, including:
Resource errors
Rx Overruns
Frames received when the link was down
Inactive and disconnected DLCIs
Inactive destination DLCIs
Unknown EDLCIs
Rx Overruns Number of Overruns received.
Rx Non-octet Frames Number of Non-Octet frames received.
Rx CRC Errors Number of Cycle Redundancy Check (CRC) errors received.
Tx Total Errors Total number of errors transmitted on the interface, including
transmit discards and transmit overruns.
Tx Total Discards Total number of discards transmitted on the interface, including
underrun flushes.
Tx Underruns Number of underruns transmitted.
Table 7-16. Frame Relay Performance Statistics (2 of 2)
Statistic What It Indicates