Paradyne FrameSaver 9720, User Manual, Page: 129 / 340

6. Security and Logins
9700-A2-GB20-20 December 2002
6-7
Limiting Telnet or FTP Access Over the TS Management Link
Procedure
To limit Telnet or FTP access for a session on the TS Management Link:
1. Select the Telnet and FTP Sessions options.
Main Menu
→
Configuration
→
Management and Communication
→
Telnet and FTP Sessions
2. Disable Telnet Session and/or FTP Session, as appropriate.
3. Return to the Management and Communication menu, and select Node IP.
Main Menu
→
Configuration
→
Management and Communication
→
Node IP
4. Set the following configuration options, as appropriate:
5. Save your changes.
See Configuring Telnet and/or FTP Sessions or Configuring Node IP Information
in Chapter 4,
Configuration Options,
for more information about these
configuration options.
To . . . Set the configuration option . . .
Disable access via a
TS Management Link TS Management Link to: None.
Assign an access
level to the TS
Management Link TS Management Link Access Level to: Level-2 or Level-3.
NOTE: A user cannot operate at a level higher than the
access level specified for the session. To allow users to
configure the unit, keep the access at Level-1.