Paradyne FrameSaver 9720, User Manual, Page: 227 / 340

10. Setting Up Network Health for FrameSaver Device
9700-A2-GB20-20 December 2002
10-3
Discovering FrameSaver Elements
Once licenses are entered and you have access to the applications, the Discover
dialog box opens. Use this dialog box to search for FrameSaver devices in your
network and discover their DLCIs.
IP addresses and the Community String for the FrameSaver devices must be
entered for Network Health to find the FrameSaver devices on the network and
discover their elements. These
elements are resources that can be polled
(e.g., LAN/WAN interfaces, frame relay circuits, routers, and servers).
The two types of statistics that can be polled are:
Statistics elements – Provide counters and other gauges for information
gathered about your network for statistical and trend analysis.
Conversation elements – Provide RMON2 and similar data for information
gathered about network traffic between nodes.
Procedure
To locate FrameSaver device elements in your network:
1. Select the LAN/WAN radio button to specify the element type to be found.
Network Health treats frame relay element discovery as a WAN element type.
2. Enter the IP Addresses of the FrameSaver devices to be located, and the
Community String (Community Name in the FrameSaver device). The
Community String is case-sensitive.
3. Select the Discover button.
The Discover dialog box closes and the Discovering dialog box opens,
showing the results of the discovery process. A message indicates the number
of elements discovered and the number of existing elements updated when
the discovery process is complete.
Depending upon the number of devices entered and the size of your network,
it could take anywhere from a few minutes to an hour or longer to discover all
elements in the network.
4. Save the search results.
Saving the search results creates poller configuration definitions to be used to
poll the devices.
See Discovering Elements in the Network Health User Guide for additional
information and to learn how to schedule automatic element discovery updates to
the database.