73
21. The system prompts:
Select Network Interface
D
D
D
4. 3COM 3C503 (Etherlink II)
Enter selection or ‘q’ to Quit [1]:
TYPE:
4
PRESS:
Enter
Select connector type
1. Thin net
2. External Transceiver (thick net)
Enter selection or ‘q’ to Quit [1]:
TYPE:
1
PRESS:
Enter
Enter I/O Address in hex [300]:
TYPE:
300
PRESS:
Enter
NOTE
If you are using basic network configuration, use the IP address in
Table 5-1. Otherwise, ask your System Administrator for the correct
IP address.
Enter this system’s IP address:
TYPE:
IP address in format “xxx.xxx.xxx.xxx” where xxx is a number from
1 to 255 inclusive
PRESS:
Enter
NOTE
Ask your Network Administrator for correct subnet mask.
Enter a subnet mask[255.0.0.0]
PRESS:
Enter
