47
9. Using
the
↑↓
keys at the SurePath BIOS Setup Main menu,
SELECT:
Exit Setup
PRESS:
Enter
10. To confirm your intention to exit,
PRESS:
Enter
11. The system automatically reboots. Follow the standard procedure for starting up a
full-feature workstation.
Installing Whitepine Exodus Software with Intel EtherExpress Card and a 14
I
or 17
I
Monitor
To install the Whitepine Exodus software when an Intel EtherExpress card is used, perform the
following steps:
1. Insert the Whitepine eXodus Installation disk into the drive and
TYPE:
A:install
PRESS:
Enter
2. The system prompts:
Enter the floppy drive to use [A:]:
PRESS:
Enter
3. The system prompts:
Enter the destination drive to use [C:]:
PRESS:
Enter
4. The system prompts:
Enter the destination directory to use [\EXODUS]:
PRESS:
Enter
If the directory, C:\EXODUS, does not exist the system prompts:
The directory C:\EXODUS does not exist. OK to create it? (y/n) [y]
TYPE:
y
PRESS:
Enter
5. The system prompts:
Do you wish to install the fonts (y/n)? [n]
TYPE:
y
PRESS:
Enter
