54
Installing the NMS Full-Feature Workstation Application Software
with Intel EtherExpress Card
A diskette is provided to install the full-feature workstation application software on your
Globalyst 575. To install the software, perform the following steps:
1. Turn on your system. Insert your disk labeled 6800 FFW Application Volume 1 into the
a: drive.
2. At the C: prompt,
TYPE:
cd C:\EXODUS
PRESS:
Enter
TYPE:
a:install
PRESS:
Enter
The current directory should be “\xone” if you have installed XONE
or “\exodus” if you have installed EXODUS.
If current directory is not “\xone” or “\exodus”
Please break out of the installation by typing
Ctrl-C
Press any key to continue
PRESS:
Enter
3. The system displays many message including the following significant ones:
Loading fonts
Loading configuration script
Loading packet driver
For further information on installation and startup –
Please refer to the C:\XONE\README or C:\EXODUS\README file.
Installation Completed
NOTE
For the 15000 platform, the division of full-feature workstations
among the three processors should be:
Host Uip-1 Uip-2
7 3 14
Configurations with fewer full-feature workstations should retain
equivalent ratios among the processors for best performance.
4. If the workstation is connected to an NMS host and while still in the \EXODUS directory:
TYPE:
COPY HOST.CFG EXODUS.CFG
PRESS:
Enter
