74
9.1.2. Sleep Time Setting
Sleep mode can reduce the energy consumption of printer effectively, and “Sleep time setting”
can be made in the idle time before the device enters sleep mode.
1. Press “
” on the printer control panel to enter the ready interface.
2. Press “▲” or “▼” to select “System Settings” - “Sleep Time Setting”, and set the sleep time as
you want.
Note
：
• In sleep mode, the printer can be woken up by pressing any key or sending
printing work.
•Sleep time of network printer can be set with the embedded Web server(Please
refer to
.
Summary of Contents for CP1100 Series
