13
2.4. Einlegen von Papier
Note
:
• Druckeraussehen konnte unterschiedlich wegen seine Modelle sein. Die schematische
Darstellung ist nur zum Informationszwecken.
2.4.1. Einlegen von Papier in das Fach für automatischen Einzug
:
To avoid the risk of electrical shock, if you are accessing the controller board or memory
devices after setting up the printer, turn the printer o
ff
, and unplug the power cord from the
electrical outlet before continuing. If you have any other devices attached to the printer, turn
them o
ff
as well, and unplug any cables going into the printer.
:
To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1. Slide out the automatic feeder tray from the printer.
Note
:
• To avoid paper jams, do not remove the tray while the printer is busy.
Summary of Contents for CP1100 Series
