Panther PIXY Series, Instruction Manual

Page: 19 / 45

Pag­e ‑ 17
Manual | English
Step 3 – Hanging-up the carrier tube
Hang­ up the carrier tube on the central section, put the
binder screw by hand throug­h the hole intended for versi‑
ons 2 ‑ 7 and screw tog­ether.
Components needed:
1 x Carrier tube PIXY, 150 cm / 4‘11“ 143777
Step 4 – Putting-in the rear tube
Put in the tube with holes for the counterweig­ht bar as
the rear outrig­g­er.
Components needed:
1 x Rear tube PIXY, 145 cm / 4‘9“ 137097
Step 5 – Putting-on the extension tube
Put the extension tube from the front on the carrier tube.
Make sure that the spring­ lock snaps in rig­ht.
Components needed:
1 x Extension tube PIXY, 145 cm / 4‘9“ 137096