Page ‑ 20
Manual | English
Step 10 - Putting-on the extension tube for bracing
Put the extension tube for bracing in front on the extensi‑
on tube. Make sure that the spring lock snaps in right.
Components needed:
1 x
Extention tube PIXY, 145 cm / 4‘9“
for bracing
137342
Step 11 a – Attaching the second upper bracing (Red)
WARNING!
Always mount the upper bracing first
before attaching the side ones.
Put the long bracing supports vertically on the respective
studs of the outrigger. Do not forget to mount the balance
rod support on bracing supports.
Hook up the red bracing wire into the respective eyelet
of the base bracing, pull it over the vertical bracing rod,
suspend it on the foremost outrigger and stretch it with
turnbuckle.
Components needed:
1 x
Abspannung Version 4
138383
