Page ‑ 10
Manual | English
6.
Check-List for assemby
Please check which konfiguration is best for your shooting.
The following criteria have to be considered:
• height
• limits in weight
• working distance
• payload required
• spatial limits
• access to shooting place
Take your time to securely assemble, to check and to test the system before use.
1. Transport
Do not expose the outriggers and rods to heavy strokes, do
not bend ropes.
2. Auxiliaries
Water level
Support device (e.g. small ladder, tripod, etc.)
3. Ground
No slope: check with water level
Use sub‑base in case of a slope
if the ground can only be loaded up to 1200 kg/ m² the load
has to be distributed by a reasonable sub‑base.
4. Basis
no slope: check with water level
min. 1200 kg/ m² load capacity of sub‑base
5. Assembly
Check whether all necessary parts are available
Assemble according to instruction
Observe safety instructions
CAUTION !
Outtrigger have to be supported under the load center of gravity if the outrigger
is loaded in only one direction. It is obligatory to observe the safety instructions
of the operating manual.
