Page ‑ 18
Manual | English
Step 6 – Putting-on the extension tube for bracing
Put the extension tube for bracing in front on the extensi‑
on tube. Make sure that the spring lock snaps in right.
Components needed:
1 x
Extention tube PIXY, 145 cm / 4‘9“
for bracing
137342
Step 7 – Putting-on the first upper bracing (Red)
Put the long bracing rod vertically on the respective stud.
Hook up the wires into the eyelets on the rear tube and
on the third outrigger and stretch the wires evenly with
turnbuckles.
WARNING!
Always mount the upper bracing first
before attaching the side ones.
NOTE !
Red‑marked wires always upwards.
Blue‑marked wires always sidewards.
Components needed:
1 x
Base bracing PIXY (upper wire)
137106
