Stage Projector
BP 4 CT
Pani Projection and Lighting Vertriebs GmbH
8
2.3) Ballast
Control Panel on the Ballast
(1)
Power indicator lamp
Illuminated when power is connected to the ballast
(2)
ON- Push-button (green)
When the "ON" - Push-button is momentarily pressed, the
ignition cycle is activated and high voltage is applied to start the HMI lamp
(3)
OFF- Push-button (red)
Lamp voltage is interrupted. It is recommended that
the unit be allowed to cool down a few moments before re-ignition
ATTENTION:
Re-ignition within 10 seconds of shut down is not possible.
(4)
Remote Switch
(remote ignition)
When the switch is rotated 90° clockwise
(remote mode)ignition is automatic, when power is applied
(5)
Main Circuit Breaker
2-pole Magnetic Circuit Breaker
BP 4
Compact
