Stage Projector
BP 4 CT
Pani Projection and Lighting Vertriebs GmbH
9
(6)
Ground Test Indicator
When depressed the indicator glows yellow indicating correct polarity and
grounding.
(7)
Remote Cable
to the Projector
(8)
Remote Fuse
F 2, 2 AT (melting fuse)
(9)
Ground Control Lamp
(10)
Lamp Current Cable
to the Projector
(11)
Remote Fuse
F 4, 10 AT (melting fuse)
(12)
Low- Noise Switch
In Low-Noise mode, silent ignition of the lamp is possible
(13)
Main Connection Cable
3x 4 mm
2
, 2 m long with free ends.
(14) Voltage and Frequency Selector on Ballast BC 4000/E
(other types of ballast adequate)
ATTENTION:
disconnect the ballast from the power supply
The lid on top of the ballast [Pos. 2.3(14)] can be removed after unscrewing
the cross screws so that the voltage and the frequency may both be set by
changing the connections 22 and 19
(15)
Slide
for fixing the vertical position of transporting grip
(16)
Snap lock
for fixing horizontal position of transporting grip
