Stage Projector
BP 4 CT
Pani Projection and Lighting Vertriebs GmbH
18
10) Slide (Transparency) Material
Because of the ever changing available film materials, we do not wish to suggest
any specific type. Our best recommendation however comes from our own
experience with film type Agfaclear (from Agfa), type Duraclear (from Kodak) and
type Ilfochrome (from Ilford). We can suggest that only professional photo labs who
will care for your work be used. Not only for which development process is used but
also the quality.
Since short times also budget-priced ink jet printed foils are used to make slides.
Please infourm yourself about actuals on our homepage (
www.pani.com
). In the
download area you´ll find the latest information.
Photographic transparencies should not be mounted between glass. The heat build-
up will be such that the slides will be destroyed. Necessary cooling of photographic
transparencies can only be guaranteed when using Special Slide Frames (Order
code: 12802 for 18 x 18 cm).
For simple and fast mounting in these frames we recommend the use of the Special
Slide Punching Machine (Order code: 12801 for 18 x 18 cm slides).
With hand painted slides, two glass plates are required such that the hand painted
side is protected by a cover glass. An air gap of 1 mm is achieved by placing 4
cardboard strips between the plates at the corners. The assembly is held together
with two strips of tape as shown below.
General remark:
If possible, insert the slide with the layer averted from the projector to protect
the layer!
