Stage Projector
BP 4 CT
Pani Projection and Lighting Vertriebs GmbH
2
Status of February 2010
CONTENTS
Page
1)
Dimension Drawing
1.1)
Projector........................................................................3
1.1.1)
Yoke Assembly "Standing"............................................3
1.1.2)
Yoke Assembly "Hanging" ............................................3
1.2)
Ballast ...........................................................................4
2)
Position Drawing
2.1)
Projector
Legend for 2.1) .............................................................5
2.2)
Control Panel on the Projector
Legend for 2.2) .............................................................6
2.3)
Ballast ...........................................................................7
Control Panel on the Ballast .........................................7
3)
Mounting Accessories
3.1)
Undercarriage for
Projectors of the "Compact"-Series...............................9
3.2)
Rolling Undercarriage for
Projectors of the "Compact"-Series...............................9
3.3)
Projector Cart for
Projectors of the "Compact"-Series.............................10
3.4)
Hanging Apparatus for
Projectors of the "Compact"-Series.............................10
3.5)
28mm DIN- Stud with
Welded Mounting Plate ..............................................10
4)
Construction
4.1)
Mechanical Construction of the Projector ...................11
4.2)
Electrical Assembly of the Projector ...........................11
4.3)
Slide Carrier and Slide Cooling Fan ...........................11
4.3.1)
Electrical Connection of the
Slide Cooling Ventilator Fan .......................................11
4.3.2)
Operating Mode "TORBO - Standard - Low Noise" ....11
5)
Operation
5.1)
HMI- Lamp ..................................................................12
5.1.1)
Installation and Replacement
of the HMI- Lamp ........................................................12
5.1.2)
Lamp Adjustment
....................................................12
5.2)
Vertical Adjustment of the Projector............................12
5.3)
Yoke Assembly for
“Standing” or “Hanging Configurations” ......................12
5.4)
Using the Tilt Angle Meter ..........................................13
6)
Condenser System
Position Drawing and Legend .....................................13
