Panduit PAT1M, Operation Manual

Page: 33 / 38

PAT1M / PAT1.5M OPERATION MANUAL
PAT1M/PAT1.5M: PA22222A01_03 Page: 31 of 36 Dec., 2007
"QUICK REFERENCE" MENUS
OPERATOR MENUS
OPENING MENU
Panduit rX.X
Appears for 5 seconds
Tool is ready
LEVEL 1 - Operator Menu ("Load, Unload, Menu" Display)
Loads:14 XXXXXXX
BUTTON 1 - Loads one cable tie
Load Unload MENU
BUTTON 2 - Unloads one cable tie
BUTTON 3 - Brings up LEVEL 2
BUTTON 4 - Inactive
LEVEL 1B – Loading commands disappear
XXXXXXX
MENU
Appears after tool is actuated one or more
times
LEVEL 2 - Load and Counter Reset Menu ("Reset" Display)
Resets load and/or counter
BUTTON 1 - Resets Load counter
Reset Ld Reset Ct Exit
BUTTON 2 - Resets install. tie counter
BUTTON 3 - Inactive
BUTTON 4 - Returns to LEVEL 1
SETUP MENUS
LEVEL 2 - SETUP MENU ACCESS
Resets load and/or counter
1. Press BUTTON 3, two times
Reset Ld Reset Ct Exit
2. Press BUTTON 1, one time
3. Brings up LEVEL 3
LEVEL 3 - Total Counts Menu
Shows total counts
BUTTON 1 - Brings up LEVEL 3A
Counters Escape MENU Exit
BUTTON 2 - Returns to LEVEL 1 or 1B
BUTTON 3 - Brings up LEVEL 4
BUTTON 4 - Returns to LEVEL 2
LEVEL 3A - Dispenser and Tool Counts
PDM
# XXXXXX Rev X.X Cycles: XXXXXXX BUTTON 1 - Inactive
PAT1M
# XXXXXX Cycles: XXXXXXX
BUTTON 2 - Inactive
BUTTON 3 - Inactive
BUTTON 4 - Returns to LEVEL 3
LEVEL 4 - Chopper Cut Cycle Menu
Turn chopper on/off
BUTTON 1 - Brings up LEVEL 4A
Chopper Escape MENU Exit
BUTTON 2 - Returns to LEVEL 1 or 1B
BUTTON 3 - Brings up LEVEL 5
BUTTON 4 - Returns to LEVEL 3
Downloaded from Elcodis.com electronic components distributor