PAT1M / PAT1.5M OPERATION MANUAL
PAT1M/PAT1.5M: PA22222A01_03
Page: 34 of 36
Dec., 2007
Error Message
Corrective Action
a. Press “Buzzer” button, open Dispenser door, Press
“Unload” button while pulling back lightly on strip of
cable ties until all cable ties are removed. Cut off bad
cable ties and reload.
6. Dispenser Jam - Check Tie
Loading
b. If having trouble clearing jam, contact Maintenance
Department. (Note: Don’t pry on white plastic roller; will
cause damage.
7. Jaw Sensor Error
8. Detent Sensor Blocked or Dirty
9. Blocked Hose - Failed Back
Pressure Test
Contact Maintenance Department
CABLE TIE CONDITION FACTORS
INCORRECT CABLE TIE
CUT-OFF
(Long cut-off / tail)
CORRECT CABLE TIE
CUT-OFF
CABLE TIE DETACHES
FROM BUNDLE
• Cable ties are too moist
(due to high humidity)
-
Turn down tension until correct
cut-off occurs.
• Cable ties are too brittle
(due to dry conditions)
-
Take new reel of ties out of
original bag.
-
Place new ties on PDM.
-
Place used reel in bag with
damp paper towel or
sponge to recondition.
electronic components distributor
