13
12
User manual
Pandora DXL-1700L service-security system
‘+XXXXXXXXXXX’ – the system’s phone number,
‘,’ – pause is a feature of the phone (can be displayed as the ‘P’, see the instructions of the phone),
‘123*’ – remote engine start DTMF command,
‘297*’ – end call DTMF command.
Contact can be added as a speed dial to any of the free button.
To have simple access to engine start function a phone other than the main owner’s phone, create
contact in the following format:
+XXXXXXXXXXX,1234,123*,297*, where:
‘1234’ – guest PIN-code.
Enable/Disable maintenance/valet mode
1. Call system’s number. Wait for answer.
2. To enable maintenance/valet mode, dial ‘Enable maintenance/valet mode’ DTMF command
551* (engine must be running, radio tag on the 2,4 GHz should be in range if immobilizer/Antihijack
mode is active).
3. Enter individual PIN-code that is located on the owner’s plastic card.
4. To disable maintenance/valet mode, dial 552* DTMF command.
Voice help
The system has voice help menu. During voice call to the system, dial 9* and listen to the
information about system control commands. To end session, hang up the phone.
Repeat the last message
To repeat any message, press * during a voice call to the system.
Arming/disarming
1. Call the system’s number. Wait for answer.
2. Dial 1* to arm or 0* to disarm.
For silent arming dial
10*
or
00*
for silent disarming.
3. The system will confirm: ‘Arming/Disarming’.
To end session, hang up the phone.
Enabling/disabling automatic engine start
Pandora system has function of promptly disabling automatic engine start.
1. Call the system’s number. Wait for answer.
2. Dial 987* to disable all automatic engine starts or 789* to enable all automatic engine starts.
3. The system will confirm execution.
To end session, hang up the phone.
Automatics starts can be enabled again by dialing 789* (all previous settings will remain intact).
Locking/unlocking the engine
You can block car’s engine using any phone. The engine will remain blocked until phone command
‘Unlock engine’ will be sent. This blocking cannot be disabled using a remote.
1. Call the system’s number and wait for answer.
2. Dial 666* to enable engine blocking or 999* to disable engine blocking (after dialing, you will
need to enter individual PIN-code that is located on the owner’s plastic card).
Request current coordinates
1. Call the system’s number. Wait for answer.
2. Dial 500*.
3. The system will confirm: ‘Current coordinate sent via text message’ and will send text message
with coordinates and a web link to a map to your phone.
To end session, hang up the phone.
Switching on interior microphone
1. Call the system’s number. Wait for answer.
2. Dial 007*.
3. The system will switch interior microphone on.
To end session, hang up the phone.
