Panasonic WV-V6430L Operating Instructions Manual Download Page 73

Page: 73 / 93

Refer to the following sheet for detailed information.

Parameter

Function

Event Type

It includes: No SD Card, SD Card Error and Capacity Warning

Enable

Check to alarm when SD card is abnormal.

Relay out

Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.

Alarm Delay

System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.

Send email

After you enabled this function, the system can send out email to alarm the
specified user.
This function is invalid when network is offline.

Capacity Limit

User can set SD card capacity that is left free in Capacity Warning. When
SD card space left is smaller than this limit, alarm occurs.

7.6.4.2 Network

When device is Disconnection, the abnormal alarm is similar with case of SD card error.

Figure 7-57

Parameter

Function

Event Type

It includes Disconnection.

Enable

Check to enable network abnormity alarm.

Record

Check it and when network abnormal alarm occurs, system will auto record.

Record Delay

System can delay the record for specified time after alarm ended. The value
ranges from 10s to 300s.

Relay out

Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.

Alarm Delay

System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.

Summary of Contents for WV-V6430L






























































































Search results

Summary of Contents for WV-V6430L

Reviews:

Related manuals for WV-V6430L

Brands by name

Popular brands

Panasonic WV-V6430L, Operating Instructions Manual

Search results

Summary of Contents for WV-V6430L

Reviews:

Related manuals for WV-V6430L

Brands by name

Popular brands