12
Parameter
Note
PTZ direction
PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.
Note:
When the camera attains its tilt end point with manual operations, the pan
automatically rotates the camera so that it does not stop at its tilt end point and
enables operations to be continued.
Speed
It controls rotation speed. The longer the step length, the higher the speed.
Step length control PTZ, zoom, focus and iris.
Quick Position
Use mouse to draw a box in monitoring video, PTZ will rotate and focus to
quickly positioning.
Zoom/focus/iris
Click
to increase value and click
to decrease value.
Note:
Some cameras don’t support iris, please refer to the actual devices for details.
3.2 PTZ
Setting
PTZ setting interface is shown as in Figure 3-3.
Here you can set scan, preset, tour, pattern, assistant, go to and pan function.
Figure 3-3
Parameter
Function
Scan
Select Scan from the dropdown list, click Start button, you can begin scan
operation. Default Scan No. is 1.
Preset
Input the preset value and then click View button, the camera turns to the
corresponding position of the preset.
Tour
Select Tour from the dropdown list and then click Start button, you can
begin tour.
Pattern
You can select Pattern from the dropdown list and then click Start button to
begin PTZ movement.
