![background image](http://html1.mh-extra.com/html/panasonic/wv-sw390-series/wv-sw390-series_operating-instructions-manual_3543451104.webp)
•
Outdoor scene:
Depending on the brightness level (illuminance), the iris will automatically be controlled
together with the shutter speed adjustment to control light. When shooting a bright subject such as outdoor,
etc., select this parameter. Be aware that flicker may occur when a subject is under fluorescent lighting.
•
Indoor scene (60 Hz) / Indoor scene (50 Hz):
The shutter speed will automatically be adjusted to prevent
flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera
is in use.
•
Fix shutter:
The selected value will be set as the fixed shutter speed.
1/30 Fix, 3/100 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix,
1/2000 Fix, 1/4000 Fix, 1/10000 Fix
•
Default:
Outdoor scene
Note
•
When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object
with less blur.
•
When a faster shutter speed is selected, the sensitivity will become lower. Smear also may appear
under bright light condition.
•
When “On” is selected for “Wide dynamic range”, only “Outdoor scene”, “Indoor scene (60 Hz)” and
“Indoor scene (50 Hz)” are available.
[AGC]
Select a method of gain adjustment from the following.
•
On(High)/On(Mid)/On(Low):
When the luminance of the subject becomes darker, gain will be
automatically incremented and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
•
Off:
Images will be captured with the fixed gain level.
•
Default:
On(High)
[Auto slow shutter]
The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of the
sensor.
The following are available for the recording duration.
Off(1/30s), Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
•
Default:
Off(1/30s)
IMPORTANT
•
When “On” is selected for “Auto slow shutter”, frame rate may become lower. Noise or white dots
(blemishes) may sometimes appear.
Note
•
When “Max. 16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
When “Off” is selected for “AGC”, this setting is unavailable.
[Day & Night(electrical)]
Select switching between the color mode and the black & white mode from the following.
•
Off:
The color mode is selected.
•
Auto:
Switches from color to black-and-white images when the ambient brightness (illuminance) of the
camera is approx. 1.0 lx or less. It takes time to switch between modes.
•
Default:
Off
[White balance]
Select a method of white balance adjustment from the following.
White color can be adjusted by “Red gain” and “Blue gain”.
104
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]